My Cart(
Items)
Very Flexible Flush Cut Tapered Quick Release Sealant Cutter-NEW-
Very Flexible Flush Cut Tapered Quick Release Sealant Cutter-NEW-
- Buy 3 for CA $4.99 each and save 29%
- Buy 10 for CA $4.49 each and save 36%
- Buy 30 for CA $3.99 each and save 43%
Additional Information
| Best for cutting | Separates deep seated sealants between bonded surfaces and cuts away window adhesives for quick deglazing work |
|---|---|
| Blade Width | 1-1/4 inch to 1/4 at tip X 0.015 inch material thickness |
| Material | Spring Steel |
| TPI (Teeth Per Inch) | N/A |
| Plunge Depth | 2 inch |
This Flush Cut Tapered Sealant scraper is rated as 'Very Flexible' and is great for cutting away adhesives, caulking, silicone or any other material build-up away from a desired work surface. Apply a little surface pressure to the blade's knife edge to effectively separate materials bonded by soft caulking .
Use this blade as a window sealant remover, it's perfect for cutting elastic silicon or soft putty connected surfaces. The flexibility of this blade makes it an excellent tool for separating materials from glass by using a little operator pressure.
The step-down flush-cut profile design allows the operator to lay the blade flat on a working surface for consistent controlled cutting without the machine's interference.
Special Alert for Bosch MX30E & MXH180B model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT suitably lock-fit onto your Bosch Tool-less Blade change multi-tool model without our C-Clip Adapter.
Special Alert for Dremel MM35, MM40, MM45 & MM50 model owners: Please be aware that this item and any of our other 'Quick Release' accessories, will NOT lock-fit onto your Dremel Tool-less Blade change model without our C-Clip Adapter.
Special Alert for Black & Decker 'Matrix' & Craftsman 'Bolt-On' model owners: Please be aware that this item will NOT suitably pin-lock into your cordless multi-tool head.
Special Alert for new Bosch StarLock & Fein StarLock model owners: Please be aware that this item and any of our other accessories, will NOT fit your 2016 or newer machines if utilizing the new 'bottle-cap' style blade anchoring system.
These blades or attachments are compatible with the following machines:
- Benchmark models (with blade change lever)
- Craftsman (all models except 'Bolt-On')
- DeWalt
- Dremel MM35, MM40, MM45 & MM50 with our C-Clip Adapter
- Dremel Velocity
- Genesis all models (with blade change lever)
- Green Tech Power Multitool
- Hercules 3.5 amp Multi-Tool
- Integra PRO Multi Tool
- Kobalt Oscillating Tool Kit
- Mastercraft Maximum Multi-tool
- Parkside PMFW 310 C2 (with blade change lever)
- Porter Cable all models (round or square blade pins)
- Rockwell Hyperlock
- Triton Multi-Tool
- Worx Hyperlock
- Black & Decker
- Stanley Fatmax
- Most Multi-Fit Standard listed machines